HOME DRAWINGS FLOW VIDEOS SUPPORT
logo

eNOZZLE®

Programmable Spray Technology

eNOZZLE® Technical Information

eNOZZLE® Specifications:

  • Up to 32 Zones of Control
  • 0-250Hz & 0-100% Duty Cycle Settings
  • 12VDC System
  • Ethernet/IP, Modbus/TCP, or PROFINET fieldbus compatible
  • Requires: 120VAC @ 20A Service

Hardware Options:

  • Allen-Bradley CompactLogix L30 or SIEMENS S7 PLC
  • Allen-Bradley Panelview Plus / MobileView, SIEMENS Comfort Panel, SE Magelis
  • Integrated into Rimrock Reciproctors and compatible with most Industrial Robots (Fanuc/ABB/Motoman/etc.)

HMI Interface:

  • Easy to use, Intuitive setup
  • Advanced Robot Integration
    • eNOZZLE® System Controls Robot Speeds & Dwell
    • Improves Robot Startup/Shutdown & Fault Recovery
    • Robot becomes part of Spray Process

eNOZZLE Specifications

Low-FlowSTD044e
Maximum Air Consumption (SCFM) 101025
Maximum Lube Consumption (GPM) 0.250.700.70
Minimum Lube Consumption (GPM) 0.0150.080.08
Mass(lbs) 0.90.92.2
Voltage(VDC) 121212
Lube Supply Filtration (micron) 101010
External Automizing Spray Head OptionOptionN/A
Internal Automizing Spray Head STDSTDSTD
Max Manifold Output Positions 323216

Contol Box Schematics

Title Sheet
Cable Overview
Power/Wiring
Cable Overview
Panel Layout
Cable Overview
External Box Layout
Cable Overview

Cabling Options

Cable Selections
Cable Overview
Recip Cabling
Cable Overview
Robot Cabling
Cable Overview
Large Robot Cabling
Cable Overview
                               



Flow Information

FlowVsFreq FlowVsFreq3D

eNOZZLE® Support Videos

Resistance Check


Flow Rate Test


Change IP Address

Tickets

Need help?

SUPPORT

Need Help?

Contact Us

Rimrock Corporation
Phone: 614-471-5926
Email: service@rimrockcorp.com